Are you trying to make changes in your lifestyle that will help to preserve some of the natural resources being used everyday? There are many things that individuals can do to make a difference. However, one of the biggest concerns is the problems caused by all the vehicles being driven today. Everyone knows that vehicles put out gas emissions that add to the amount of air pollution already causing problems for humanity. But what can you do?

Very few people can do without some sort of vehicle in today’s society. It would be almost impossible to get from one location to another without driving most of the time. Still, it’s important to do all you can to reduce the amount of pollution being emitted into the air. Since buying a hybrid is not an option that everyone can take advantage of, here are a few tips for driving green that will help reduce pollution caused by vehicles.

• Proper Maintenance - One of the best things that you can do to make sure you’re driving green is to keep the maintenance up on your vehicle. Keep it tuned up, air filters changed and make sure the tires are inflated properly.

• Carpool When Possible - It may not always be possible to carpool but do so whenever you can. This will make more of a difference than you might think.

• Plan Your Trips: If you plan your trips in advance you can cut down on your driving time. You can plan the shortest route that will accomplish everything you need to get done. Stop by the store on your way home from work instead of going home first and leaving again. Anything that reduces your driving time will help.

• Walk More - When you’re visiting a neighbor, going to the local park or anywhere that is near your home, try walking whenever it’s practical to do so.

• Cut Down on the AC - Only use the air conditioning whenever it’s absolutely necessary. You can roll down the windows other times to let a breeze blow through.

• Drive Smart - Driving smart includes avoiding sudden stops and starts and driving the speed limit. Speeding uses more gasoline and produces more pollution than necessary.

These are all simple and easy things that everyone can do to help the environment. If every driver were to make these changes it would make a huge difference in the amount of pollution created each day.

Noise and vibration control is an issue that is much more common than one might originally think. In fact, it can creep up in the most unlikely of places. A good case in point is animal lab environments. Indeed, ALN Magazine recently ran an article titled “Noise & Vibration Considerations for the Animal Lab Environment.” Therein, the publication pointed out, “In the lab animal facility setting, noise, sound, and vibration affect the life cycle, interaction, and behavior of animals.” However, because “the impact of noise, sound, and vibration is a largely undocumented factor in the research,” it’s an often overlooked issue.

“If the sound pressure levels get too high,” the article continues, “there is a negative impact on animals and structures.” Vibration control, however, is just as important to these animals as noise control in that it “is a driving force behind radiated sound.”

Obviously, exposure to noise and vibration can be detrimental to an animal’s hearing, but the risks don’t stop there. “Sound and vibration can [also] have a physical impact on animals.” Even more startling, “Smaller animals are more susceptible to the affects of sound and vibration over time and will adapt or adjust accordingly. In some cases, mutations may result from exposure to undesirable conditions.”

How can animal laboratories mitigate these problems? The magazine notes, “The designers can control items that are constant disturbances that may greatly impact the animal community. Items within the designer’s control include ventilation system design, machinery vibration isolation, wall construction, lighting selection, and computer terminal placement.”

During the design process, animal labs may want to consult with a producer of custom-molded rubber and rubber-to-metal bonded parts for noise and vibration control. A world leader in the creation of rubber molding and rubber-to-metal bonded parts can help to create an environment that is not only safe for the animals being kept there but is also conducive to a healthy work environment for the people who are employed there.

The Vibro-Insulator line of isolators and mounts, in particular, aid in the control of noise, vibration, and shock. Selecting the right type of mount for an individual animal lab’s specific applications can prove tricky, however. That’s why consultation with an expert with reputable qualifications in rubber molding and rubber-to-metal bonding can be very beneficial.

Of course, once professional advice has been obtained, browsing the Vibro-Insulator catalog allows animal labs easy navigation so they can select the correct mount for their application. Rubber Vibro-Insulators come in a variety of styles and sizes to handle most vibration isolation problems. Most of the mount styles are designed to be used in either the compression or shear direction.
Selection of the proper Vibro-Insulator for a specific application boils down to a multi-step mathematical function that an expert can calculate for the lab or into which the lab’s design team can plug the following information:

1. The maximum load that must be supported.
2. The number of mounts supporting the load.
3. The frequency of the disturbing vibration.
4. Any restrictions on the size or style of the mount based on space limitations or assembly considerations.

Does you family recycle aluminum cans? Do they do it to get a little extra cash or because it is the responsible thing to do? How much do they, and you, know about what happens to the can after the soda is gone? Here is a quick true and false quiz on recycling. It will only take 2 or 3 minutes to find out what you know and what you need to know about the importance of families recycling.

Circle the answer for each of the 6 questions. Now test the other members of the family.

1. In the time it takes you to read this question, 50,000 12-ounce aluminum cans are made.

                  True or False

2. When you recycle one aluminum can you save enough energy to equal a half gallon of gasoline?

                  True or False

3. There is no limit to the amount of times aluminum can be recycled.

                  True or False

4. We use over 80,000,000,000 (billion!) cans a year.

                  True or False

5. At one time, aluminum was more valuable than gold.

                  True or False

6. More aluminum goes into beverage cans than any other product.

                  True or False

Surprise! All of the answers are true.

Did you know that for every $10 spent buying things $1 or 10% goes for packaging that is thrown away. Packaging, and that includes aluminum cans, represents 65% of household trash. Wow. What a waste of money and resources. We can do better than that.

Our family is making a special effort to Recycle, Reuse and Reduce. Will you join us in helping to protecting our earth and natural resources? Maybe your family could put up a special box to save aluminum cans for the recycling center.

Finishes are coatings that are  applied to the external and inside surfaces of walls to protect them from the elements and from wear and tear.  They also improve the appearance of the structure and are used to enhance the design of rooms.

Petroleum, our main source of oil-based wood finishes and paint, is a non-renewable resource.  There are now paints and finishes on the market that are derived from a renewable resource, which  in a small way, helps to reduce dependence on oil, and  contributes to a more sustainable world.

The basis for these products is whey, which is a product of cheese making, and which has a high biochemical oxygen demand (BOD).  This increases the burden on waste treatment facilities, and can also pollute our natural water sources.  In the last ten years, this by-product has been used for many new purposes, one of which is natural wood finishes.

When choosing paints for your decorating, use the low or no VOC (volatile organic compound) paints. For hundreds, no, thousands of years, earth, clay and lime have been used, both in hot and cold areas of the world.  And now this knowledge is being readapted for contemporary use. If you do any redecorating or new building, it makes sense to contribute to having green, healthy surroundings.

Low and no VOC paints have less smell and less impact on air quality.  EPA studies have shown that indoor air quality is up to five times more toxic than outdoors, mainly because of toxic emissions from paint and finishes. This particularly affects anyone with allergies, asthma, or chemical sensitivities. With the new “green” paints, there will be lower contamination of landfills, groundwater, and the ozone.

Switching will not cost you more.  Cleanup is easily done with soap and water, instead of toxic chemicals, and brushes can easily be cleaned and reused.  The paint is still washable, and is far less harmful to you, your pets, and the environment.

Residential solid trash, also called urban solid waste and municipal solid garbage, is refuse that normally comes from households. It is either in solid or semisolid form. There are five general categories of solid garbage that include:

1) Biodegradable waste: food and kitchen
2) Recyclable material: paper, glass, bottles, cans, metals, and certain plastics.
3) Stagnant rubbish : construction, dirt, rocks, and debris.
4) Assorted waste: clothing, plastics,etc.
5) Household hazardous waste: toxic such as paints, chemicals, light bulbs, spray cans, fertilizer and pesticide containers, batteries,etc.

Cities and towns generally contracts out solid garbage removal services. They will submit bids, assess each bid, and recommend a company. The rubbish company will bill the city or town. These companies are privately owned so if a person has a lot of waste after a project such as home renovation, they can hire a garbage removal company to remove the refuse.

Because of environmental regulations and a growing demand for a cleaner environment, junk companies are now performing the following services:

Recycling Programs: Curbside recycling is usually available to all residential customers. Customers will separate their recyclables according to paper and plastics for curbside pick up. Depending on the contract, this is normally done every two weeks. There can be special recycling programs such as Christmas tree recycling. The trees are then made into mulch. Other special programs a town or city can offer are Spring and Fall Clean Ups. They are designed to encourage residents to get rid of large amounts of garbage.

Hazardous Materials: Every year, millions of people accumulate such hazardous waste products as batteries, paints and stains, cleansers and polishes, motor oil, antifreeze, pesticides and herbicides,etc. These are dangerous to the environment, people, and animals. A rubbish removal service is trained to remove these products safely and responsibly. They will sort and categorize the hazardous materials before storing them in containment units. The contracted hazardous waste hauler packs the items in drums and sends them to hazardous rubbish incinerator or other treatment facility for proper disposal. Some materials, such as used motor oil, lead-acid batteries and antifreeze, are recycled.

Compost Services: Many cities and towns offer a compost service. They will provide compost bins for people to place such items as kitchen food garbage, newspaper, and other items that can be composted. A contracted junk removal company will pick up the compost left on residential curb sides.

Energy Recovery Plants: Plants that convert rubbish to energy are popping up all over the country. These plants burn garbage to heat water which produces steam in much the same way power plants burn coal, oil, natural gas, or wood. The steam can cause a turbine to produce electricity. Junk removal companies that have energy recovery plants in their area will make use of these services.

Special Handling waste Removal Services: Cities and towns will have a contracted service to remove large items such as tires, air conditioners, household appliances, and construction debris. Tires are sent to a recycling or recovery facility and household appliances, after chlorofluorocarbon gas removal, are taken to recycling stations.

Individual Contracted waste Removal Services: There are situations where a person has too much waste to be removed by a city or town removal service. They will then enlist the services of a private company. They are trained and certified to dispose of waste, compost, and recycle residential goods. For a nominal fee, a company will come to your home and remove all of your excess trash.

Because of growing environmental concerns, most companies dispose of waste in ways that will have the least environmental impact. You will feel good knowing that you are doing your part to protect and conserve the environment.

Everyone is looking for ways to save money and help conserve our natural resources. There are many methods that are easy to start in your own homes, but one very simple and obvious way to save is by reducing water consumption. Here are just a few easy water saving tips that you can begin doing today.

1.  Turn off running water in your sink or shower when you’re actually using the water. You can easily fill the sink with a enough water to wash your face, or fill a cup to brush your teeth. You may consider turning off the shower faucet while you’re washing your hair and then turn on again to rinse. Think about how much water is wasted. The same goes for dishes in the kitchen, turn off the water until you’re ready to rinse.

2.  There are low-water consumption toilets available that use only a couple of gallons of water each time they are flushed. If you have a standard toilet, one green living tip you may consider is placing a plastic bottle filled with sand into your toilet tank. This little trick helps the tank fill up faster and use less water.

3.  The laundry is another area where it is easy to waste water, and just as easy to save. Do your laundry in large loads rather than several smaller ones.

4. Limit your water waste outdoors. Don’t wash your car or driveway as often as you have been, and when you do, turn off the outside faucet until it’s time to rinse your car.

5. Look throughout your home, checking the faucets, toilets and pipes for any leaks. The very smallest of drips coming from a leaking pipe can eventually cost you a lot of money. Fix any leaks that you find.

If you are looking for simple ways to save the planet and save yourself money, start at home with these 5 easy steps. The planet and your wallet will thank you.

Even with the economy cooling, “Green” products remain — well — if not hot, still very warm.

In a report released in February ‘09, market research firm Mintel predicts 19% growth for eco-friendly products through 2013, even though the current economic downturn is expected to negatively impact sales through this year.

But “Green” can mean a lot of different things to different people. And that produces some understandable confusion for consumers as to what is truly “Green” and what is instead “Greenwashed”.

[Greenwashing is when companies over-hype the positive environmental impact of their products or policies. Tsk-tsk.]

Each and every day we review green deals and giveaways before posting them online to ensure the products being promoted are indeed eco-friendly. Some are easy to assess, like a sweepstakes for a Prius. But many times, the green aspect of a product is not as clear-cut as it is for a hybrid car.

To help us determine what’s green and what’s not, we looked to criteria established by trusted non-profits, such as Green America, the Natural Resources Defense Council and Consumer Reports, and compiled the following rules-of-thumb:

1) Above all, use common sense. Ask yourself …

• Is the product friendly to the planet?
• Does it help save energy on the road and at home; conserve water; support organic and sustainable farming?
• Is it nontoxic, recycled, cruelty-free and/or fair-trade?

2) Look for Certifications/Associations

Is the product certified or does the manufacturer have a membership association? Here is just a small sample of the many, many green certifications and associations out there. Consumer Reports “Greener Choices” website has a terrific Eco-label section which can help you sift through the meaning and relative significance of various labels.

• Household Products — Green Seal; Certified Biodegradable
• Cosmetics — Leaping Bunny; Campaign for Safe Cosmetics Signatory
• Food — Organic Certification; Marine Stewardship Council; Certified Humane Raised and Handled
• Wood — Forest Stewardship Council
• Green Business Practices — Green America Approved

3) Read the Ingredient List

If a company or product doesn’t have certification/membership affiliations, is there some way for consumers to evaluate their green claim? For example, products that claim to be natural should include a complete ingredient list.

4) Is the Product Fair Trade Certified?

Fair trade certification ensures not only that the producer of a good is paid a fair price but also that social and environmental standards are met during production of that good. Many companies may claim their products are fair trade, but you should double check to see whether the product has actual certification from a fair trade labeling organization. In the U.S., that organization is TransFair USA (though at this time, they only certify agricultural products, like coffee and tea.)

5) Is the Product Vegan or Vegetarian?

According to a report by U.N. climate experts, animal production is responsible for 18 per cent of all greenhouse emissions, most of it emitted in the form of methane from belching cattle. Yes, that’s right — gassy cows. So shifting your purchases to vegetarian or vegan products — not only food, but items such as shoes and beauty products — can mean fewer burping Bessies and less harm to the environment.

Shoppers looking to go green are welcome to use these rules of thumb as a starting point when trying to evaluate the “greenness” of product. But in order to become true green consumers, there is no substitute for first-hand knowledge. We highly encourage shoppers to become as educated as possible on what is and isn’t considered green these days, and how they can evaluate green claims. Be forewarned — trying to decipher what’s green is not a perfect science, but the non-profits mentioned above are excellent places to start your coursework. Good luck!

Report Links:

Mintel Finds Fewer Americans Interested in Going “Green” During Recession (Feb 09)
Livestock a major threat to environment (Nov 06)

“My Oh My” this is getting serious. What is happening to our honey bees? We have been starting to see the actual effects of the honey bee decline after placing our last order for bulk beeswax. As a manufacturer of natural beeswax lip balms and candles we have always been getting our beeswax here in our home state of Florida and last month was the first time we had to order from outside the sunshine state. Is this due to the rapid decline in honey bees or are we just worrying too much? Well facts are facts and we have some serious problems with the honey bee decline. Why are the bee colonies down as much as 60% we ask? Well it does seem that bees and humans may have something in common. Nutrition is as vital to us as it may be to the honey bees and it is possible that the bees are undernourished which may be the cause of the problem. Many states are seeing less dense bee hives and this may be contributed to the lack of nutrition the bees are getting.

Another possible cause of the honey bee crisis may be the pesticides that are being used. Many hives die as a result of “pesticide poisoning”. There are literally billions of honey bees dying prematurely and the source must be found before this world suffers severely. The honey bee only has a six week life cycle in the summer, three weeks inside the hive and three weeks outside, but many are not even making it to the fourth week.

So yet another possible source of this dilemma is the huge rise in cell phone stations and also cell phone use. Some are claiming the huge growth of clogged air waves with cellular waves may be disturbing the bees and causing the early deaths. Stephen C. Sharp who has been studying this problem for many weeks while not a scientist gives no personal merit to this cause. He states “Cellular phones have been around for long enough to see a potential problem with the bees. This problem came like a train wreck. I think there would have been many initial signs if the cellular wavebands were the source of the bee problem.”.

Other topics that have been thrown around as to the potential source of the bee crisis has been a virus or possibly mites that have worked their way into the bee colonies. Whatever the cause it must be isolated and controlled. Bottom line is if the bees all die maybe we will too! Bees are the only source to carry pollen of various fruits and nuts. Many plants do not reap the benefits of wind travel for pollination therefore if the bees vanish so does much of our food supply. We would begin to see a decline in new plants, brush, flowers, crops, and more. The honey bee gets food such as nectar and pollen from flowers and in turn pollinates the flower which allows the plant to reproduce. No bees, no reproduction!

Sincerely,

Stephen C. Sharp

Port Orange, Florida

With the current economic problems, hopefully more people are interested in saving money and recycling. Businesses are always interested in keeping the customers they have and getting new ones.

The cost of fuel has been big in the news for years but, when compared to plastics, it’s a small percentage of petrochemical use. Saving on the use of petrochemicals for making plastics can extend the timeframe before peak oil and lower the price of fuels.

Most grocery stores offer a five cent per bag discount if you bring in your bags. You can do that in a variety of ways. One is by taking the old plastic bags back and another is using cloth bags, which can often be purchased at the store. Usually, grocers will sell cloth bags with their advertising on them at their cost, which is cheaper than an equivalent type bag can be purchased elsewhere. By doing that, the grocer gets their investment back and advertisement as well. If your grocer doesn’t have a program of that type, tell them about the advertising value and mention that you take your bags everywhere, including their competitor’s store.

If you don’t want to spend the money on cloth bags, reuse your old plastic ones. Plastic bags aren’t as durable as cloth and it’s a good practice to double bag when using a plastic bag more than once or twice.

We’ve found cloth bags to be a good investment. Most of our bags are almost twenty years old. If we save two cents a bag and buy ten bags of groceries, and do that five times a month, we’ve saved a dollar a month. That doesn’t sound like much but our cloth bags paid for themselves the first year, with the last eighteen plus years being pure savings.

Tying the bags off keeps the goods inside from spilling all over the trunk on the way home. But, tying them off presents another problem. Getting them untied, especially the plastic bags, can be difficult if not impossible. Most people consider it not worth the effort and rip them apart. There’s a simple answer to that problem. Since a picture is worth a thousand words, I have a brief slide show that explains the process. Once the bags are tied in the manner I show in the pictures, they untie easily and can be used over and over.

Since a picture is worth a thousand words, I have put together a slide show tutorial. You can access the slide show by going to the URL in the resource box.